Isolite Max 2.0 Series Instructions Download Page 1

INSTRUCTIONS

Max 2.0 Series

Wet Location LED Exit Sign

120/277VAC

IMPORTANT SAFEGUARDS 

When using electrical equipment, basic safety precautions should always be followed including the following: 
1. 

READ AND FOLLOW ALL SAFETY INSTRUCTIONS 

2.   Disconnect power before performing work on electrical equipment.
3.   Use caution when servicing batteries.  
4.   Equipment should be mounted in locations and at heights where unauthorized personnel will not readily subject it to
 tampering.
5.   The use of accessory equipment not recommended by Manufacturer may cause an unsafe condition, and
 

will void the unit’s warranty.

6.   Do not use this equipment for other than its intended purpose.
7.   Servicing of this equipment should be performed by qualified service personnel.

8.

  

SAVE THESE INSTRUCTIONS!

Headquarters: Isolite 31 Waterloo Avenue, Berwyn, PA, 19312 Phone: (610) 647-8200 Fax: (610) 296-8952

Western Office: Isolite 3563 Sueldo Suite M, San Luis Obispo, CA 93401 Phone: (800) 799-5343 Fax: (805) 546-9564

Reviews: