1. For indoor use only.
2. Make sure appliances are off before plugging into
the Smart Switch.
3. Do not use this product near water or in locations
that may cause the Smart Switch to become wet.
4. The maximum current for the Smart Switch is 10A
and the maximum power capacity is 2000 Watts.
Exceeding this capacity may damage your Smart
Switch.
5. Avoid placing product near areas of high radiation
or heat such as radiators or stoves.
6. When unplugged, clean with a soft and dry cloth.
Do not use abrasive or solvent-based cleaners.
Quick Installation Guide
EN
The Smart Switch allows you to create scheduled
tasks and turn on or off home appliances from
anywhere using your smartphone.
iSmartAlarm™ is a trademark of iSmart Alarm, Inc.
iPhone is a trademark of Apple Inc,
Registered in the U.S. and other countries.
©2014 iSmart Alarm, Inc. All rights reserved.
Power button
Product Overview
How to Connect Your iSmartAlarm™
Smart Switch
1. Plug the Smart Switch into a power outlet and
make sure the power button’s LED is solid white.
iSmartAlarm™ CubeOne.
iPhone running iOS 6.0 or later, Android phone
running version 4.0 or later.
Safety Instructions
System Requirements
6. For more information
，
please visit
https://www.ismartalarm.com/
5. After the Smart Switch
is found, press the Add
button to add it to
your system.
4. Pull down the Safety
Monitor page and tap
on the Add Devices
button.
3. Select Safety Monitor
at the top.
2. Launch the iSmartAlarm
app and go to the Monitor
page.
