iSMA-B-MINI/MIX BACnet User Manual
www.ismacontrolli.com
DMP261en | 1st Issue rev. 8 | 05/2022
page 67 of 114
•
•
•
•
•
•
•
•
•
•
Figure 48. The MIX38-IP Digital Outputs page
The Digital Output table contains the following fields:
State (read/write): the actual state of the digital output;
Default State (read/write): the output state after power-up and watchdog operation;
Hand State Output (read-only, MINI series only): manually override the status of the
switch;
Watchdog (read/write): device watchdog value in seconds.
9.3.4 Analog Outputs
This page allows for entering the configuration parameters and showing the actual value
of the analog outputs. To open this page, please navigate to the Local I/O tab and choose
the Analog Outputs from the submenu.
Figure 49. The 4U4A-H-IP Analog Outputs page
The Analog Outputs table contains the following fields:
Value (read/write): the actual value of the analog output in millivolts [mV];
Type (read/write): the analog output operating mode voltage/PWM;
Default Value (read/write): default output value after the power-up and watchdog
operation;
Digital Output (read/write): the output status flag for the DO mode;
Default Digital Output (read/write): the default output status for the DO mode;
Watchdog (read/write): the device watchdog value in seconds;
WARNING!
To save changes, please use the
“Submit”
button
.
