Manufacturer of Quality Air Conditioning and Heating Products • www.islandaire.com • sales@islandaire.com • (800)-886-2759
36
Part Number 6080066
When air conditioner is operating, indoor air is filtered
and refiltered continuously trapping airborne dirt and
dust in the washable filter. The air intake filters are
removable for easy cleaning. A clean filter helps remove
dust, lint, and other particles from the air and is impor-
tant for best cooling and operating efficiency.
Check the filter every two weeks to see whether it needs
cleaning.
1. Turn unit off.
2. Remove front cover.
3. Remove air filter by grasping the edge of the filter
frame and pulling out of the unit.
4. Wash in hot soapy water, rinse and shake dry.
5. Replace the filter.
6. To dry the filter thoroughly, run your unit for a few
minutes in fan mode.
Routine Maintenance
• Keep air intake filter clean.
• Coils should be inspected periodically for build up of
lint, dirt, leaves, other debris, and bent fins.
• Clean coils with a soft brush and compressed air or
vacuum. Do NOT use sharp objects to clean coils.
• The fan motors are permanently lubricated and do
not require re-oiling.
• In areas of heavy snow and ice accumulation, snow
and ice should not be permitted to accumulate
against the unit. As soon as practical after such
inclement weather, clean snow and ice from around
the unit as much as possible from the filters of the
unit.
• If unit is installed over the winter, be sure that the fan
turns freely before turning it on.
Maintenance
AIR INTAKE
FILTER
Figure 35
Chassis Installation
