49
www.iskomed.de
13
Operational faults and solutions
Fault
Measure
1
None of the motors respond to the switch
actuation.
Check plug connection between the hand control and control
box.
Check plug connection between the motor cables and
control box.
Check the plug connection of the power cord.
2
A motor does not respond to the switch actuation
Check plug connection between the motor cable and control
box.
Check plug connection between the hand control and
control box.
3
Error number 1 or 2
For initialization, press the left and right keys
simultaneously in the fourth row of keys until the motors
have retracted completely. After initialization, the drives
can be used again
Table 6: Operational faults and solutions
For issues which cannot be rectified using the aforementioned instructions; any changes,
new settings or repairs to the bed may only be implemented by the manufacturer directly,
or by a workshop authorised by the manufacturer.
14
Recommended accessories
Article
Order number
Mattress RG 35
(according to DIN 13014 with 120mm height)
(flame retardant according to DIN 597 part 1 and 2)
NS-039-0
Incontinence cover
high quality, 3 sides with zip
NS-040-0
Side rail cladding made of composite
(recommended for patients with impaired perception)
NS-049-0
Side rail increase
(to be attached, increase by 16cm)
NS-058-0
Table 7: Recommended accessories
