![Isilon Systems Isilon IQ 32000X-SSD Field Replacement Manual Download Page 31](http://html1.mh-extra.com/html/isilon-systems/isilon-iq-32000x-ssd/isilon-iq-32000x-ssd_field-replacement-manual_2092859031.webp)
Note: The network interface card you are replacing may look different than the one shown in this figure.
2
1
2 Network interface card
1 Small riser card
Figure 21. Removing the network interface card
Install the network interface card
A network interface card (NIC) is installed to replace a failed NIC, or to move a working NIC to a new node.
Prerequisite: Before installing a NIC, ensure that the node is shut down, and the top panel is removed.
1. Insert the NIC into the socket on the small riser card.
2
1
2 Network interface card
1 Small riser card
Figure 22. Installing the network interface card
2. Insert the small riser card with the new NIC into the socket on the motherboard.
3. Secure the NIC to the rear panel of the node using two mounting screws.
4. Install the node top panel.
For more information, see
on page 39.
©
2011 Isilon Systems, LLC.
31
Expansion cards