ISHIDA IGB Series, Operation Manual, Page: 24 / 40

3.2 Weighing PLUs
4 Place the item on the weigh platter.
The display will show the net weight.
[Example] Net weight 5,970g
IGX Series IGB Series
Ä
3
WEIGHI
NG
NOTE
y
When the net weight exceeded the programmed upper weight limit, the “OVER”
indicator will light up.
y
When the net weight did not reach the programmed lower weight limit, the
“UNDER” indicator will light up.
y
When the net weight is between the upper and lower weight limits, the “ACCEPT”
indicator will light up.
5 After determining the PLU item weight, remove it from the weigh platter.
6 When weighing the same PLU item again, repeat steps 4 and 5 above.
NOTE When weighing a different PLU item, repeat steps 2 through 5 above.
7
To confirm the preset tare, press the COLUMN key.
IGX/IGB Series Operation Manual No. 0203A page 21