Isgus PERFECT 2030, Operating Manual

Page: 106 / 138

5-18 Operation Chapter 5
Summary by Cards
This feature provides a summary report of the hours totals for a defined range of
time cards within the memory of the time recorder.
Summary report creation is only intended for use by supervisors and therefore can
only be accessed through the password protected programming routine. You have
the option of just viewing the report on the display or printing the totals on a blank
time card.
Condition: None
Application:
To produce a listing report of individual time cards. The report
can be either printed on a blank time card or sequentially
shown on the time recorder’s display. The display report
contains the date and time of the last punch of each card
number and the regular hours total. The card report additionally
contains the grand regular total of all printed time cards.
Hint
The reported totals are calculated up to the last
OUT punch of each employee
Procedure:
1. Enter the time recorder programming mode. ("R" key)
2. Select the menu "SUMMARY BY CARDS": ("S" key)
3. Enter the card number range. ("R" and "E" keys)
Hint: The larger the range selected, the longer it will take to
compile the report.
If the card number range from 000000 to 999999 is
selected, the output of all cards stored in the time recorder
is started immediately in no particular order.
After having confirmed the last digit with key "E" the display
switches to the next indication.