4-16
Getting Started
Chapter 4
Setting the Time and Date
Attention
To set the analogue clock and/or the internal quartz clock always
exactly observe the procedure described as follows. It is not
sufficient to set only the hands of the analogue clock.
Set time first, enter date after.
Proceeding
1.
Press "
E
" until column pointer marks the
symbol for time.
Time is displayed.
2.
Example:
.
.
D1
D2
D3
Enter current hour using "
R
" .
D2 = hour
Value range:
00 - 23
.
If you do not want to change the value
displayed, continue with step 3.
3.
Confirm the value using "
E
" .
Recorder switches to minutes.
4.
Example:
.
.
D1
D2
D3
Enter minutes using "
R
".
D3 = minutes
Value range:
00 - 59
.
The value entered should be set one
minute before the desired reference time.
5.
Press "
E
" when reference time of an external
clock corresponds to the time displayed on the
recorder.
Now clock starts with 00 seconds.
