22
Product Version 1.0 | Revision A | Released 2022-2-21
The i-2 UVA POI includes a spanner with magnet to estab
-
lish connection between the fixture and the wireless
transmitter.
The spanner also has two types of pig-nose keys used for
tilt adjustment in POI fixtures.
In i-2 UVA POI devices, the largest pig-nose key is used for
tilt adjustment.
The tilt angle in POI fixtures may be adjusted by using the
large pig-nose key provided in the spanner.
To adjust the tilt angle in i-2 UVA POI, take the following
steps:
•
Use the spanner and turn both tilt lock screws (one
on each side) counter-clockwise by using the large
pig-nose key. Screws are loosened by turning coun
-
ter-clockwise.
•
Tilt the fixture to the angle desired and hold it.
•
Lock the position by tightening the tilt lock screws
clockwise with the same pig-nose key.
CAUTION!
ALWAYS LEAVE A FIXTURE TO COOL OFF FOR 15 MINUTES AFTER OPERATION BEFORE HANDLING.
POI TILT LOCK
Figure 15: P-6 POI Tilt lock
Figure 16: POI Spanner