F
9000 Reader/Writer
ELECTRONIC SUPPORT SERVICE
iseozero1
.com
®
i s e o
. c o m
Iseo Serrature s.p.a
Via San Girolamo 13
25055 Pisogne (BS)
ITALY
Tel. +39 0364 8821
[email protected]
Non contractual document. Subject to change. Cod. KW19780 - 19/06/2019
F9000 Reader/Writer Installation guide (EN) - © 2019 Iseo Serrature S.p.a. - www.iseo.com
INSTALLATION GUIDE
1. TECHNICAL SPECIFICATIONS
Frame, wall mounting and desktop reader/writer units for F9000 keys.
PRODUCT:
- Cylinder hole for F9000 key insertion.
- RS485 communication interface.
- Power supply: by Atlas.
- Power consumption: 1W.
- Multicolor signaling LEDs (green, blue, red) and acoustic buzzer.
FEATURES:
- Operating temperature: -10°C ÷ +50°C (internal version).
- Operating temperature: -25°C ÷ +50°C (external IP55 version).
- Storage temperature: -25°C ÷ +75°C.
ENVINRONMENTAL CHARACTERISTICS:
2. MODELS & VERSIONS
Wall fixings not provided in
the kit. The installator must
choose the most suitable
fixings according to the wall
type and material.
- Desktop version: 120 x 111 x 82 mm
- Frame Mounting 503 version: 120 x 82 x 55 mm
- Frame mounting GIRA version: 80 x 80 x 50 mm
- Wall Munting Vimar version: 120 x 88 x 55 mm
- Wall Munting Vimar IP55 version: 100 x 83 x 65 mm
DIMENSIONS (LxDxH):
IP5
5
VIM
A
R
Desktop Reader
(Vimar Idea plastic box)
Frame Mounting Reader
(Vimar Idea frame &
503 box compatible)
Frame Mounting GIRA
(GIRA frame & box
compatible)
Wall Mounting Reader
(Vimar Idea plastic box)
Wall Mounting IP55 Reader
(Vimar Idea IP55 plastic box)
3. WARNINGS
Read this manual prior to use the device in order to ensure a safe and proper use.
Preserve this manual as future reference.
The installation of the device requires the intervention of qualified staff, adequately trained by ISEO.
The instructions should be carefully followed during the use of the product. These instructions should be
passed on by the installer to the user.
No modifications of any kind are permitted, except for those described in these instructions.
The product must be destined only for the use for which it is expressly designed and therefore as a reader and
writer unit for civil and industrial locations. Any other use is considered improper and dangerous.
4. ELECTRICAL CONNECTIONS
TX/RX 485 (A)
TX/RX 485 (B)
(10
÷
24 Vdc)
(GND)
F9000 Reader
connector (RS485)
- Wiring cable not included in the kit.
- Recommended cable: Ethernet cable FTP AWG24
CAT5E (and above or equivalent data cable).
- Min/max cross-section of the wires: 0.20÷1.5mm
2
(24÷15AWG).
- Min/max cable diameter: 3÷7mm
- Max length: up to 500mt
R
5. ELECTRICAL CONNECTIONS TO ATLAS
R = 120 ohm - 1/4 W
Supplied with the reader
ATLAS DIN
ATLAS STANDARD (STD)
ATLAS PLUS
CH1
4
3
2
1
(GND)
CH2
4
3
2
1
5
6
CH2
4
3
2
1
(GND)
CH1
4
3
2
1
(GND)
6. ELECTRICAL CONNECTIONS EXAMPLE: TO ATLAS BY ETHERNET CABLE
Ethernet cable
FTP AWG24 CAT5E
(Max length 500mt)
R
4
3
2
1
ATLAS PLUS/STD CH1 (J5)
ATLAS DIN CH1 and CH2
R
A
B
F9000 Reader
connector (RS485)
Maximum Ethernet cable length between Atlas and F9000 Reader: 500mt.
Required Atlas power supply: 24Vdc.
Resistance value: 120 ohm (1/4W) on both Atlas and F9000 Reader sides.
Connect the ethernet cable shield to the Atlas GND connector only if Atlas NOT connected to ground.
(GND)
R = 120 ohm (1/4 W)
For more information about Atlas and its connectors, refer ot the
Atlas Installation Guide
avalable at:
app.iseo.com
.
6.1 ELECTRICAL CONNECTIONS EXAMPLE: TO ATLAS CH2 BY ETHERNET CABLE
Ethernet cable
FTP AWG24 CAT5E
(Max length 500mt)
R
4
3
2
1
R
A
B
(GND)
R = 120 ohm (1/4 W)
ATLAS PLUS/STD CH2 (J11)
and CH1 (J5)
4
3
2
1
(GND)
4
3
2
1
5
6
CH1
CH2
See warnings at box 6.
F9000 Reader
connector (RS485)
Recommended capacitance conductor/conductor < 100pF/m.
Recommended conductors electrical resistance max 90 ohm/Km.
Ethernet cable FTP AWG24 CAT5E (and above).
A
B
A
B
https://www.iseo.com/it/it/download
