Linear units with toothed belt drive: LEZ 1/LEZ 2/LEZ 3/LEZ 9
Assembly instructions
Page 11
2.2
Construction of the toothed belt unit/drive elements
The appended drawings and part lists clarify the structure of linear units.
Example: LEZ 9
1)
Toothed belt, HDT 3 M, 15 mm wide;
2)
central lubrication option;
3)
simple
tensioning of the belt via locking bolts under the slot;
4)
buffers on both sides with parabolic springs;
5
drive motor flanged on both sides;
6)
variable fixing options;
7)
2 steel shafts Ø 8 mm pressed into the
section and calibrated;
8)
patented isel shaft slots with T-groove slots, plane milled;
9)
rigid aluminium
sections in lengths up to 6 m;
10)
embedded steel pinions on both sides