6
isel
flat bed installation GFV
3
Safety notes
•
The machine may not be operated in an explosive atmosphere.
•
The machine is encased all around. The enclosure protects you against moving tools,
decreases the operating noise level, and restrains the chips.
During processing, the hood is bolted and can not be opened.
You may neither remove nor change this safety device.
•
Always ensure that the workpieces are properly secured.
•
For cases of emergency, you find an Emergency-Stop switch on the service console
and at the power unit; it interrupts the voltage supply for the power electronics and to
the main spindle drive.
•
Expert and trained personnel may only handle the key-operated switch since an
increased injury danger exists in test operation.
Please keep the replacement key under lock and key.
•
The persons, who control the machines, must be 18 years old!
All persons, particularly under eighteen years, must be constantly supervised by the
training!
•
Ensure sufficient ventilation when machining material releasing dust or gas.
•
No liquid water may be used for cooling but only a spraying/cooling device with which a
water fog causes the cooling action (see accessory). No drops may be formed and flow
under the bottom plate.
