ISCO 6700SR, Instruction Manual, Page: 121 / 190

6700SR Refrigerated Sampler
103
Figure 21 Password Protected Functions
Switch Bottle Set at Enable
When this software option is activated, it allows the 6700FR to
switch to a new bottle set each time a program part becomes en-
abled. The sample interval will be reset at the enable time, and a
sample will be taken if programmed to SAMPLE AT ENABLE.
Telephone Commands
Several commands are available to control the sampler’s operation
from a remote location. Telephone commands require the sampler to
be equipped with the factory-installed 2400 baud talking modem.
After connecting to the sampler from a touch-tone telephone, com-
mand numbers may be entered from the telephone’s keypad, fol-
lowed by the
(pound) button. The commands are listed in
Table 12 .
To use telephone commands:
1. Dial the sampler’s telephone number. When the sampler con-
nects, it answers with “Isco Sampler Site [number].” If the
sampler does not receive a command in five seconds, it as-
sumes that a computer modem has called and initiates the
modem connect sequence. If this occurs you must hang up
and try again.
2. Enter the command. For example, to run program 1, press
.
R U N
P R O G R A M
V I E W R E P O R T
O T H E R F U N C T I O N S
M A I N T E N A N C E
M A N U A L F U N C T I O N S
P R O G R A M M I N G S T Y L E
From Standby
While Running a Program
S A M P L I N K R E P O R T
F L O W L I N K R E P O R T
C U S T O M R E P O R T
A L L R E P O R T S
P r o g r a m m i n g
S c r e e n s
E N T E R P A S S W O R D :
_ _ _ _
V I E W D A T A
P R I N T D A T A
S Y S T E M I D s
C O N F I G U R E R E P O R T S
E N T E R P A S S W O R D :
_ _ _ _
S A M P L E 3
I N 0 0 : 0 3 : 2 6
E N T E R P A S S W O R D :
_ _ _ _
S T O P P R O G R A M
R E S U M E P R O G R A M
V I E W D A T A
G R A B S A M P L E
E N T E R P A S S W O R D :
_ _ _ _
S t o p K e y
E N T E R P A S S W O R D :
_ _ _ _
O n / O f f K e y
The interrogator cable must be
disconnected before you can
use the modem.
Note
#
1 #