SERVICE MANUAL
© ISA, s.r.o. 2014-2015. All rights reserved.
We reserve the right to change the specification without prior notification.
Always check for new version of this document@
Service manual V1.08 | Nov-2015 | LM0002-EN
Page 25 of 97
3.5.2.3
Setup single or three phase power output
It is necessary to setup proper electrical power before connecting filtration pump to LVLØ output.
For this purpose, use
connector
position details in section 2.2.2., and the
supplied insulated insertion bridges. Following
table shows connections for particular power connection:
Three Phase
Single Phase
1
] connect
1
not connected
2
2
] connect
3
] connect
3
4
4
not connected
5
] connect
5
not connected
6
6
] connect
7
] connect
7
8
8
not connected
9
] connect
9
] connect
10
10