background image

10

EN

  

BERRY

USE AND MAINTENANCE MANUAL

428000756137

2. MANUFACTURER

ISA S.p.A.

 

Via Madonna di Campagna 123

06083 Bastia Umbra PG - Italy

T. +39 075 801 71

F. +39 075 800 09 00

E. [email protected]

www.isaitaly.com

3. WARRANTY TERMS AND CONDITIONS

The seller's warranty on the equipment is valid for 

12

 (TWELVE) 

months from the date of delivery

The warranty includes repairs or replacements of any faulty parts due to manufacturing processes or 

installation after written communication has been received, stating the appliance serial number and date 

of installation. 

Not included in the warranty:

•  all defects caused by incorrect use of the appliance
•  all defects caused by incorrect electrical connection
• 

all defects caused by normal wear (for instance compressor failure and fluorescent lamp malfunctioning 

that is not due to manufacturing defects)

• 

calls for installation, technical instructions, adjustments and cleaning the condenser

 

If the seller's technical staff detect any tampering, unauthorised repairs or inappropriate use of appliance 

the warranty will be invalidated. 

Shipment of components covered by the warranty is freight collect only. 

Any damage to the appliance detected at the time of delivery due to transport must be reported on the 

same shipping note to claim compensation from the carrier. 

The seller cannot be held liable in the event of damage to the preserved product due to appliance failure

Summary of Contents for BERRY





































Reviews: