
iES26G Series User’s Manual
iS5 Communications Inc.
73
information
no snmp community-
strings
[Community]
G
Remove the specified
community.
switch(config)#no snmp
community-strings public
no snmp snmpv3-user
[User Name]
password
[Authentication
Password] [Privacy
Password]
G
Remove specified user of
SNMPv3 agent. Privacy
password could be empty.
switch(config)# no snmp
snmpv3-user test01
password AuthPW PrivPW
no snmp-server host
[Host-address]
G
Remove the SNMP server host.
switch(config)#no snmp-server
192.168.10.50
5.11
Commands Set List—Port Mirroring command set
Commands
Level
Description
Example
monitor rx
G
Set RX destination port of
monitor function
switch(config)#monitor rx
monitor tx
G
Set TX destination port of monitor
function
switch(config)#monitor tx
show monitor
P
Show port monitor
information
switch#show monitor
monitor
[RX|TX|Both]
I
Configure source port of monitor
function
switch(config)#interface
fastEthernet 2
switch(config-if)#monitor RX
show monitor
I
Show port monitor
information
switch(config)#interface
fastEthernet 2
switch(config-if)#show monitor
no monitor
I
Disable source port of monitor
function
switch(config)#interface
fastEthernet 2
switch(config-if)#no monitor
5.12
Commands Set List—802.1x command set
Commands
Level
Description
Example
8021x enable
G
Use the 802.1x global
configuration command to
enable 802.1x protocols.
switch(config)# 8021x enable
8021x system radiousip
[IP address]
G
Use the 802.1x system radious IP
global configuration command to
change the radius server IP.
switch(config)# 8021x system
radiousip 192.168.1.1
8021x system serverport
[port ID]
G
Use the 802.1x system server
port global configuration
command to change the radious
server port
switch(config)# 8021x system
serverport 1815
8021x system
accountport
[port ID]
G
Use the 802.1x system account
port global configuration
command to change the
accounting port
switch(config)# 8021x system
accountport 1816
8021x system sharekey
[ID]
G
Use the 802.1x system share key
global configuration command to
change the shared key value.
switch(config)# 8021x system
sharekey 123456