44
C
HAPTER
15
W
EB
I
NTERFACE
: S
AVE
AND
R
ESTORE
C
ONFIGURATIONS
2.
To save the configuration to USB, perform the following.
a.
Navigate to the Save Configuration screen.
F
OR
EXAMPLE
:
In the Home page, go to
System > Save and Restore > Save
R
ESULT
:
The following web page will appear.
b.
Set the fields as follows:
•
Save option
—select USB Save.
•
Save Format
—select either
MIB OID
or Script. Script format is human- readable.
•
File Name
—default file name where the switch configurations are saved is iss.conf. Use
the default file name.
c.
Insert the USB thumb drive into the USB port on the front of the MicroRAPTOR.
d.
Click
Apply
to save the changes.
S
TEP
R
ESULT
:
The current configuration will be saved to USB.
3.
To Restore a Configuration from USB.
a.
Navigate to the
Restore
page.
F
OR
EXAMPLE
:
Go to
System > Save and Restore > Restore.
R
ESULT
:
The
Startup Configuration Restore Source
page appears.
Figure 1:
Startup Configuration Restore Source
b.
Set the fields as follows:
•
Save option
—select USB Save.
