38
C
HAPTER
13
W
EB
I
NTERFACE
: IP A
DDRESS
AND
D
EFAULT
R
OUTES
13. Web Interface: IP Address and Default Routes
This section will explain how to set the IP Address on the MicroRAPTOR and create a default route.
P
REREQUISITE
:
To perform the tasks in this section, you will have already logged into the MicroRAPTOR via the
Web UI
.
Speak with your Network Administrator to determine the values of the following parameters:
•
IP Address
•
IP Address Mask
•
Default Route
These values will be needed to configure the MicroRAPTOR.
1.
Configure the
VLAN
settings by first navigating to the
VLAN
settings screen.
F
OR
EXAMPLE
:
Go to
Layer 3 Management > IP > VLAN Interface.
S
TEP
R
ESULT
:
The following screen will appear.
VLAN Interface Basic Settings
2.
Configure the values as follows:
–
Select
—select the
VLAN
Interface for which configuration needs to be modified or deleted. In
this case it will be
VLAN
interface #1.
