IS5 COMMUNICATIONS iSG18GFP, User Manual

Page: 25 / 78

ISG18GFP USER MANUAL, GENERAL, SECTION G
UM-G-iSG18GFP-4.5.06.1-EN.docx 20
© 2020 IS5 COMMUNICATIONS INC. ALL RIGHTS RESERVED
4.8 GCE Commands Description
Table 9 – GCE Commands Description
Command Description
default mode Configures the mode by which the default
interface gets its IP address.
default vlan id
Configures the vlan ID for the default
interface.
default ip address
Configures the IP address and subnet mask
for the default interface.
ip address Sets the IP address for an interface. The no
form of the command resets the IP address of
the interface to its default value.
default ip address allocation protocol
Configures the protocol used by the default
interface for acquiring its IP address.
ip address - dhcp
Configures the current VLAN interface to
dynamically acquire an IP address from a
DHCP server.
login authentication
Configures the authentication method for
user logins for accessing the GUI to manage
the switch.
login authentication-default
Configures the authentication method for
user logins for accessing the GUI to manage
the switch.
authorized-manager ip-source
Configures an IP authorized manager and the
no form of the command removes manager from
authorized managers list.
mtu frame size
Configures the maximum transmission unit
frame size for all the frames transmitted
and received on all the interfaces in a
switch.
snmp trap link-status
Enables trap generation on the interface.
The no form of this command disables trap
generation on the interface.
clock set
Manages the system clock.
Delete startup-cfg
Clears the contents of the startup
configuration
cli console
Enables the console CLI through a serial
port. The no form of the command disables
console CLI.
flowcontrol
Set the send or receive flow-control value
for an interface
[no] shutdown - physical/VLAN/port
interface
Disables/enables a physical interface / VLAN
interface / port-channel interface
debug interface
Sets the debug traces for all the
interfaces. The no form of the command
resets the configured debug traces.
debug-logging
Configures the displays of debug logs. Debug
logs are directed to the console screen or
to a buffer file, which can later be
uploaded, based on the input.
incremental-save
Enables/disables the incremental save
feature