IS5 COMMUNICATIONS iSG18GFP, User Manual

Page: 21 / 78

ISG18GFP USER MANUAL, GENERAL, SECTION G
UM-G-iSG18GFP-4.5.06.1-EN.docx 16
© 2020 IS5 COMMUNICATIONS INC. ALL RIGHTS RESERVED
- show aliases
- show users
- show history
4.6 Root Commands Description
Table 8 – Root Commands Description
Command Description
Help [command] Displays a brief description for the given command.
To display help description for commands with more than one
word, do not provide any space between the words
clear screen Clears all the contents from the screen.
Enable [<0-15> Enable
Level]
Enters into default level privileged mode. If required, the
user can specify the privilege level by enabling level with a
password (login password) protection to avoid unauthorized
user.
Disable [<0-15> Enable
Level]
Turns off privileged commands. The privilege level varies
between 0 and 15. This value should be lesser than the
privilege level value given in the enable command.
configure [terminal]
Enters configuration mode.
run script
Runs CLI commands from the specified script file.
listuser
Lists all the default and newly created users, along with
their permissible mode.
Lock Locks the CLI console. It allows the user/system administrator
to lock the console to prevent unauthorized users from gaining
access to the CLI command shell. Enter the login password to
release the console lock and access the CLI command shell.
username Creates a user and sets the enable password for that user with
the privilege level.
alias - replacement
string
Replaces the given token by the given string and the no form
of the command removes the alias created for the given string.
access-list commit Triggers provisioning of active filter rules to hardware based
on configured priority. This command is applicable only when
provision mode is consolidated. Traffic flow would be impacted
when filter-rules are reprogrammed to hardware.
logout Exits the user from the console session. In case of a telnet
session, this command terminates the session.
end Exits the configuration mode
exit Exits the current config location to one step up in the root
show privilege Shows the current user privilege level
show line Displays TTY line information such as EXEC timeout
show aliases Displays all the aliases
show users Displays the information about the current user.
show history Displays a list of recently executed commands