iRBX6GF User’s Manual
UM-iRBX6GF-4.5.1-EN.docx
Pages 100 of 119
10.3
Ports
This setting allows managing individual ports of the switch.
Figure 32 – Ports Interface
Ports Control
Figure 33 – Ports Control Interface
The following table describes the labels for
Ports Control
Interface
screen.
Label
Description
Enable
Add a checkmark to enable it.
Tagged
To set a port as
Tagged
, check the box adjacent to the ports label. Tagged packets
contain an 802.1Q (dot1q, VLAN) tag with a PVID (for more details, refer to IEEE
802.1Q [1]). The default value is untagged (not checked).
PVID
To assign
PVID
(port VLAN ID), enter a number in the appropriate box. The default
value is 1. A Port VLAN ID (pvid) is a default VLAN ID that is assigned to an access
port to designate the virtual LAN segment to which this port is connected. PVID
number must be in the range 1-4095 (number of the available VLANs for the switch)
