iES6 Series User’s Manual
iS5 Communications Inc.
13
3.2
Panel Mounting Option
The switch can also has an option to be panel or wall mounted. The following steps show how to mount the
switch on a panel or wall.
1.
Install the Panel mounting hardware onto the switch. The user can choose rear mounting or side
mounting. Note: To avoid damage to the unit, use the 4 screws provided to install the panel mount
brackets onto the switch.
i
ES6
i
ES6-S
Figure 6 - Panel Mounting
2.
Use the holes in the brackets to secure the switch to a wall or panel.
3.3
Chassis Ground Connection
The iES6/ iES6-S chassis ground connection uses a #6-32 Screw. We recommend terminating the ground
connection using a #6 ring lug and a torque setting of 15 in.lbs (1.7Nm). The red outline indicates the
location of the chassis ground.
Figure 7 - Chassis Ground Connection
