iRZ MC52PU, User Manual, Page: 13 / 15

13
2.
Run SetID application ("SetID.exe" file), main application window will open (see Fig. 3.2). Click on
“Найти устройство
” (1) button. The bottom margin of the main window will turned to yellow (2), in
strings “
Устройство
” (3) and “ID” (4) ID’s numbers will be displayed (see Fig. 3.2);
Fig. 3.3. Generate ID
3.
Click on “
Сгенерировать
” (5a) button, or input any four-digit number to a “ID” string (5b) (see Fig. 3.3);
4.
Нажать на кнопку
“
Запрограммировать новый
ID” (6).
Программа изменит серийный номер
ID,
нижнее поле главного окна станет голубым
(7) (see Fig. 3.3).
После этого операционная система
обнаружит новое устройство и придётся снова установить драйвера
.
Repeat this operation for every modem.
The modem can be rebooted using one of the following ways:
Eight transitions of the DTR COM-port line into a passive state (DTR < -2V), the duration of the
impulses and pauses between the impulses should remain within the range of 100-500ms;
By using AT-command “AT+CFUN=1,1”
Temporary power shutdown.
The modem can be shut down using one of the following ways:
By using AT-command “AT^SMSO”
After using “AT^SMSO”, you can use alarm clock function (ALARM mode) to turn on modem.
Power shutdown.
5a
5
b
6
7