CEILING FAN VOICE CONTROL MANUAL
Model # MS380A
APPEARANCE:
PAIRING PROCESS
Step: 1
. Install the voice control to the power adapter with plug-in USB or computer USB. The voice control would be
make a beep sound for indicating power on. Within 10 seconds of turning the receivers AC power ON,
speak the pairing password to the voice control. The voice control would send frequency to the ceiling fan.
Step: 2
. The receiver of ceiling fan has detected the frequency, the fan light will flash two times and turn off. It is
pairing ok and ready to control.
NOTE
: The remote distance from the voice control to the ceiling fan is about 10-12m. Microphone effective distance
is about 3-5m.
After completing the steps above, you should be able to operate the ceiling fan and light. If the fan is not responding
to the voice control, please turn the power off to the receiver and repeat step 1 and 2.
OPERATIONS
Every time please speak awakening password at first. Then speak control command words.
Function
Voice control command words
Pairing setting
Pairing setting
Turn fan off
Turn fan off
Turn light on
Turn light on
Turn light off
Turn light off
Turn fan at lower
speed
Fan lower speed
Turn fan at low speed Fan low speed
Turn fan at Med. speed Fan Med. speed
Turn fan at high speed
Fan high speed
Note:
After speaking awakening password, please speak the control command words within 10 seconds. If the
voice control makes beep sound twice, it is mean timeout. Please repeat speaking awakening password and
control command words.
Please note the improper volume and speed of speaking cause control failure.
Only use the awakening password and control command words of this manual.
