Page 6 of 11
Main Parts of Product
Reference
Subassembly
1
Short Handle
2
Long Handle
3
Base Plate
Assembly Instructions
⚠
WARNING
•
Read the entire Important Safety Information section at the beginning of this manual including all
text under subheadings therein before set up or use of this project.
•
Assemble only according to these instructions. Improper assembly can create hazards
•
Keep assembly area clean and well lit.
•
Keep bystanders out of the area during assembly.
•
Do not drill new holes to attach winch to mount or weld winch to mount.
1.
Take the winch cradle out of the carton.
2.
Insert the mount into the receiver of the vehicle. Secure the winch cradle and winch by inserting
the linch pin through the holes.
3.
Assemble the winch on the winch cradle with bolt and nut.
Note:
Some parts are listed and shown for illustration purposes only, and are not available individually
as replacement parts.
