Page 4 of 19
Intended Use
The Ironton 12,000-Lb. 12 Volt DC Electric Truck Winch has a cable tensioner to prevent cable
tangling. The series-wound motor stays cooler during long pulls. The three-stage planetary gear
system provides fast line speed. The automatic load-holding brake insures maximum safety. The
freespooling provides a fast line-out while the 12 ft. ergonomic handheld remote control. The winch
contains a roller fairlead with nylon bushing and an aircraft-grade wire rope
Technical Specifications
Property
Specification
Rated Single Line Pull
12,000 Ib.
(5454
kg.)
Application
Vehicle Recovery / For Trucks and SUVs
Motor
12V DC 6 HP Series Wound
Power In & Power Out
Yes
Duty Cycle Rating
5%
(45
sec at Max Rated Load;14min, 15 sec Rest)
Pendant Controller
Wired, 12 ft (3.7m) Long
Gear Train
3-stage Planetary
Gear Ratio
265:1
Freespool
Sliding Ring Gear
Brake
Auto Load Holding
Drum (Dia. XL)
2.5" X 8.8"(64mmX224mm)
Clevis Hook
3/8
”, Replaceable with Spring-Loaded Safety Latch
Fairlead
Roller with Nylon Bushings
Wire Rope Size/Type
0.375" x 65
’ (9.5mm X 19.8m)
Nominal Strength=14,000 Ib.
7X19 Galvanized Steel
Aircraft Wire Rope
Battery
12V DC Minimum650 CCA
Battery Cables
Min. 3.5Gauge
Mounting Bolt Pattern
10
’’x 4.5’’(254mm x 114.3mm)
Mounting Hardware
Winch:4xG8, M12-1.75X25mm
Fairlead:2xG8.M10-1.50X30mm
Solenoid Box: 2xG8.ST-M5X14mm
Overload Protection
In
line Circuit Breaker
Sound Rating
85dB
Overall Dimensions
(LXDXH)
21" X 6.4" X
8.3’’
Weight
86.8 Ib.
(39.4
kg)
IP Rating
IP
66-Winch and Controls (resistant to powerful water jets, except remote
control switch)
