Assembly & Operating Instructions
Ironmaster Spotting Stand for Super Bench
Congratulations on your purchase of this fine Ironmaster product. For any technical questions or support
please contact us at 1-800-533-3339. Be sure to read and understand the operating instructions.
Part
#
Part Name
Description
Qty
1
Base
U shaped frame with
bench saddle
1
2
Left Upright
Round tube with angle
base support
1
3
Right Upright
Round tube with angle
base support
1
4
Left Dumb-
bell Saddle
Dumbbell saddle with
round tube welded
below
1
5
Right Dumb-
bell Saddle
Dumbbell saddle with
round tube welded
below
1
6
Pull Knob
Pull and screw lock
knob
2
7
Bolts
M10 x 20 mm bolts
6
8
Washers
M10 flat washers
6
Steps:
1.
To assemble the stand, first unpack all components and locate the hardware kit.
2.
Assemble the BASE to the LEFT UPRIGHT and RIGHT UPRIGHT frame components using the
M10 bolts and washers. Be sure to position the location of the pull pin toward the inside as shown in
the exploded view drawing.
3.
Insert the LEFT and RIGHT DUMBBELL SADDLES into the round tubes of the UPRIGHTS so
the slotted holes alight with the pull pins as shown in the exploded view drawing.
