Operating Instructions
Ironmaster Quick-Lock Ultimate Training Vest
Congratulations on your purchase of this fine Ironmaster product. Be sure to read and understand the
operating instructions to achieve the best performance and avoid injury.
Using the Straps:
The main lower straps must always be used. The upper strap
is optional and intended for use in more dynamic exercising to
hold the vest more securely to the body.
The main lower straps are made in two parts so you can adjust
the length and location in the front and back. Depending on
your body size you may need to overlap the strap ends. It is
recommended to set the straps on the back of the vest first,
then put on the empty vest and find where the best front loca-
tion is for the Velcro. Adjust the back Velcro locations if need-
ed. Then to put on the vest, leave the straps attached on the
back and lift it carefully over your head and pull the straps
around to the front and secure.
The OPTIONAL upper straps are also made in two parts and
must attach to each other in the back and front. We recom-
mend locating this smaller strap as shown above. Not needed
for most vest training uses but available for a more secure fit.
ALWAYS secure the Velcro flaps down over the plate pockets
before use.
This weight vest is intended only for use with the Ironmaster Quick-Lock Dumbbell weight plates.
For further details and information please visit our website at www.ironmaster.com.
For customer service, contact your local distributor or:
Ironmaster LLC,14562 167th Ave SE Monroe, WA 98272 USA
www.ironmaster.com Email: [email protected] Tel: 800-533-3339 or 1-360-217-7780
