Assembly & Operating Instructions
Ironmaster Leg Attachment for SuperBench
Congratulations on your purchase of this fine Ironmaster product. Be sure to read and
understand the operating instructions to achieve the best performance and avoid injury.
Part #
Part Name
Description
Qty
1
Stub Frame
Square tube with brackets and stub that plugs into the bench
1
2
End Cap
Rubber foot cap *already installed*
1
3
Leg Frame
Square tube bent with plate holder
1
4
Plug
Square 45 x 45 mm *already installed*
2
5
Plug
Diameter 1" *already installed*
1
6
Adaptor
Olympic Plate Adapter Sleeve
1
7
Plug
Black plastic cap for Olympic Adapter *already installed*
1
8
Screw
M6 x 8 mm (Allen Head)
1
10
Axle
Diameter 20mm x 49.5 mm
1
11
Washer
O.D. 20 mm x I.D. 10 mm
5
12
Bolt
M10 x 20 mm
3
13
Roll Pad Tube
Diameter 1.0" x 400 mm
3
14
Roller Pad
Diameter 4" x 7" (L)
6
15
M8 Washer
Chrome
6
16
Cap
Black plastic dome cap
6
17
Bolt
M8 x 25 mm (Allen Head)
6
19
Allen Wrench
M6
1
20
Allen Wrench
M8
1
22
Bolt
M10 x 70mm bolt
1
23
Cap Nut
M10 cap nut
1
CONTENTS:
Warranty Information:
Ironmaster warrants to the original purchaser that this Home Fitness Product will be free from defects in workmanship and materials for a specific period from date of purchase based on the part type
listed below. During the warranty period, Ironmaster will either repair or replace, at its option, defective part(s) at no charge. Warranty covers in home use only.
1 year for normal wear items such as rubber, upholstered parts and surface finishes.
10 years for frame and structural components.
Shipping costs are not included in the warranty and some items may need to be sent to Ironmaster for repair or replacement. Installation of any parts and labor involved is not included. The warranties
described above shall be the sole and exclusive remedy available to the purchaser. Correction of defects, in the manner and for the period of time described above, shall constitute complete fulfill-
ment of all liabilities and responsibilities of Ironmaster to the purchaser with respect to the product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict
liability or otherwise. In no event shall Ironmaster be liable or in any other way responsible for damages or defects in the product which were caused by repairs or attempted repairs performed by
anyone other than Ironmaster or Authorized service Contractor. This warranty shall not apply if the defect was caused by misuse, neglect or normal wear and tear of the product purchased. Nor shall
Ironmaster be liable or in any way responsible for any incidental or consequential economic or property damage. Some states do not allow the exclusion of incidental or consequential damage, so the
above exclusion may not apply to you.
Congratulations on your purchase of this fine Ironmaster product. The following instructions will help you assemble the
unit and provide some details on use as well. The only tools required are two adjustable wrenches and a 6mm Allen
Wrench (Included with Hardware kit). Check prior to Assembly that parts from both the main box and hardware kit are
all present.
CAUTION: The IRONMASTER LEG ATTACHMENT CAN ONLY BE SAFELY USED WITH THE IRONMASTER SU-
PER BENCH: Ironmaster assumes no liablity if used with any other product other than the IRONMASTER SUPER-
BENCH. Follow all assembly instructions and refer to the exploded diagram on the back side of this page.