IRONKEY ENTERPRISE S250/D250 USER GUIDE
GE 12
Using my device
Setting up the device
Enterprise devices must be set up using a Windows or Mac operating system. Once set up, you
can use your device on Windows, Mac, or Linux systems. The setup process is the same for
systems running a Microsoft Windows or Mac operating system.
1.
Plug the IronKey device into your computer’s USB port. The ―Device Setup‖ screen appears.
The setup software runs automatically from a virtual DVD. This screen may not appear if
your computer does not allow devices to autorun. You can start it manually by:
•
WINDOWS: Double-clicking the ―IronKey Unlocker‖ drive in ―My Computer‖ and
launching ―IronKey.exe‖.
•
MAC: Opening the IronKey Unlocker drive in Finder and opening the IronKey application
in the IronKey Unlocker folder. You can install the Auto-Launch Assistant, so that
the Unlocker will automatically open when you plug in a device. See ―Installing the
Auto- Launch Assistant (Mac only)‖ on page 14.
2.
Type or paste the Activation Code. You should have received the code in an email
message sent from your Administrator.
3.
Select a default language preference, agree to the end-user license agreement, and then click
the ―Activate‖ button.
By default, IronKey software will use the same language as your computer’s operating system.
4.
Type a device password and confirm it, and then click the ―Continue‖ button.
Your password is case-sensitive and must comply with the password policy set by the
administrator.
5.
If you are prompted to provide an email address for an online account, enter it now and
click the ―Continue‖ button.
A message prompt will appear indicating that an email has been sent to you. Follow the
instructions in the email to set up your online account; this includes creating a ―secret
question‖.
Your online account is required for some security features, such as resetting a password,
updating your device software, and creating online backups of Identity Manager data.
6.
Once you have set up your online account, click OK in the message prompt to proceed with
the device setup.
7.
Click ―Continue". The device initializes.
