Copyright 2020 Iron Bow Technologies
22
Change Standby Settings
The default system configuration goes into standby mode after two hours with no
activity. You can change this setting to disable standby mode or change the delay after
which the system goes into standby.
To change standby settings, navigate to
Setup>System Configuration>Standby.
To disable stand-by mode:
Set
Standby Control
to
Off
.
To enable stand-by mode:
Set
Standby Control
to
On
and set a
Standby delay time
Set Standby Delay:
Input the required number of minutes between 1 and 480.
Save Configuration changes:
Select
Save
