Copyright 2020 Iron Bow Technologies
19
Sharing Content from Connected Devices
Managing Audio Settings
This section describes how to manage audio settings by using the integrated control
panel. For instructions on how to manage audio settings, please refer to the
Cisco Webex
Codec plus Administrator Guide:
Enabling and Disabling Microphone Mute Mode
Transmit PC
sends the image from a connected PC or HDMI device to the
remote site as a second image in conjunction with the main system camera.
The image will automatically be shown as a window on the main screen. To
end transmission, select the control again or select the Horus Scope input,
which will replace the PC image with the Horus Scope image.
When the PC
transmission is active, the LED associated with this control will illuminate
Transmit Horus Scope
sends the image from a connected Horus Scope or
HDMI device to the remote site as a second image in conjunction with the main
system camera. The image will automatically be shown as a window on the main
screen. To end transmission, select the control again or select the transmit PC
input, which will replace the Horus Scope image with the PC image.
When the
Horus Scope transmission is active, the LED associated with this control will
illuminate
Microphone Mute
selection stops the room audio from being transmitted to
the remote site and the LED indicator illuminates. A second selection
resumes the room audio transmission.
This function mutes both the
integrated microphone and optional auxiliary Cisco microphone, if
connected, but does not affect transmission of an electronic stethoscope.
