Quick Setup Guide
*
Turn key to “On.” Wait
for the intialization to
complete.
STEP 1
Plug in probe.
STEP 2
Press “OK” on defaults
screen.
STEP 3
Press “OK” on Safety
Warning Screen.
STEP 4
Press “Preset.”
Note: Please refer to the Cyclo G6
Operator Manual to create a new
preset.
STEP 5
CYCLO G6
TM
Press desired preset.
STEP 6
Press “Select”.
STEP 7
Press “Treat” button.
“Treat” button will turn
a constant green and
laser is ready.
STEP 8
Press here.
RESETTING COUNTDOWN TIMER
Parameters shown here are for illustration only.
Treatment parameters are solely at the discretion of the treating physician.
