·
You should take out the plug after you use, let it cool completely then
start to clean it.
·
Please use wet cloth clean the dirt on the product after you use it.
·
Please don't use the corrosive cleaning fluid, benzene or diluents to
clean the product.
·
Avoid to trouble, please don't use wet cloth to clean the control
panel, you can only use dry cloth to clean it.
·
If you don't use it for a long time, please clean it and put in carton,
and put in a ventilated and dry place, in case the product get damp
and affect the performance of the product.
U SHOULDER HUG
Stretch Your Neck And Shoulder
SAVE THESE INSTRUCTIONS
※
Products refer to the actual product, without prior notice.
Operation Instructions
SL-D501
Cleaning and maintenance
Trouble shooting
This chapter summarizes the most common problems encountered in
the use of this product. If you can't solve the problem with the
following information, please consult with the maintenance center or
customer service center authorized by your district.
If you encounter the other questions didn't mention as the list, please
try as below steps:
1. Turn off the machine, take out the power plug.
2. Keep the products in off state 60 minutes.
3. Plug the power plug into the power socket again and start the
machine.
Problem
Possible causes
Solution
The product
can't work
The power plug is out or
adaptor DC end is not plug
in.
After 10 minutes massage,
the product switched to
standby mode automatically.
You continuous use the
product for 40 minutes,
and the overheat protection
device cut off the power.
Overload on the product
(Somebody stand on the
products or with weights on
the product)
Plug the power plug in the
power socket, or insert the
adaptor DC end to the
product, and check the
product voltage is it well
matched with local voltage.
If you want to massage again,
press the “on/off” button
to start.
You must take out the plug
and cool for 60 minutes if
you want to reuse it.
Take out the power plug,
move out the weights (if the
weights still on the products),
plug in the power plug again
and start the machine.
The product
get heat
With noise
come out
The warm function is on
You continuous use the
product for 40 minutes.
The problem caused by
the mechanical structure.
Turn off the warm function
Take out the power plug and
let it cool, take out the power
plug every time after you
use it.
It is normal noise, not mean
the product has function
problem.
Model: SL-D501
Name: Massage Belt
Rated voltage: 12V
Rated power: 25W
Rated working time: 10 minutes
Safety structure:
Product specification
Product operation sketches
Kneading massage on neck, shoulder and back
