Author: RRi
Page - 7 -
Version 1.0
Date: 10-2019
BLANKOM-IPQAM-801_User_Manual_ENv1.0.docx
IPQAM-801 DVB-C A/C Modulator IP to QAM User Manual
1.4 Block Diagram
1.5 Appearance and Description
Front and Rear Panel Illustration
Front (left picture)
From Left to Right:
COM-port for debugging by Serial adapter cable (not delivered with the product), GbE-DATAPort (includes the
NMS Management), status LED's and a FAN (this needs to be kept open for air cooling purpose)
Rear:
RESET-Button (can be used to restore default settings)
RF-Test-Output = -20dB attenuated
RF-Out (please use a BNC-IEC adapter for your inserting into an existing CATV network or to the F-Input of a
BLANKOM Multiswitch which have a terrestrial input to the coax as pathways (active or passive available).
ASI 1+2 output for passing the final remultiplexed Transportstream to other Equipment
USB connector (not in use), Power LED Red, 12V DC Input (+=middle Jack-pin).
