User Manual BMM-1716
All technical values are subject for changes w/o further notifications
IRENIS GmbH © 2021
Safety instructions
Read the safety instructions carefully before assembling or commissioning the device and ensure that you
comply with them
1. Installation
Danger: The device may only be installed and started up by competent people (see EN 60065).
Danger: The device and the peripheral distribution devices must be earthed properly (potential
equalization) in accordance with EN 60728-11 before
Commissioning and remain earthed even when the device is dismantled.
Danger: The device may not be installed on a flammable base (risk of fire).
Danger: Only connect the device to a socket that is installed correctly and connected to devices that has
an earth conductor
(Depending on Model andUsage).
Danger: Plan the assembly or installation location to ensure that children cannot play with the device and
its connections.
There is a risk of electric shock (Danger of death).
Danger: Select an assembly or installation location in which fluids or objects cannot get into the device
under any circumstances (e.g. condensation, water for watering plants, etc.).
Danger: Ventilation slots and refrigeration units are important function elements on the devices. If
devices have refrigeration units or ventilation slots, you must ensure that they are never covered or built
over. Also ensure that there is sufficient air circulation around the device. This prevents possible damage
to the device and the risk of fire due to overheating. Ensure a minimum of clearance of 20cm between
the device and other objects.
Danger: The assembly or installation location must allow all connected cables to be laid safely. Cables and
power supply cables must not be damaged or crushed by any objects. Furthermore, ensure that cables
are not laid in the immediate vicinity of sources of heat (e.g. radiators, other electrical devices, fireplaces,
etc.) (Risk of fire), (risk of electric shock danger of death)
Danger: In order to prevent damage to the device, as well as possible subsequent damage (risk of fire),
devices intended for installation on the wall are only permitted to be installed on a level surface and not
above head height.
Warning: (Only for optical transmitters and their peripheral distribution devices) Never look directly or
indirectly into the laser beam. Only connect the device to the power supply once all optical lines are
connected securely.
Warning: The safety regulations in the relevant current standards EN 60728-11 and EN 60065 must be
complied with.
Warning: Comply with all applicable national safety regulations and standards.
Warning: The device's mains plug must be easily accessible at all times.
Warning: Follow all instructions in the device-specific operating manual
2. Operation
Danger: The device is only permitted to be operated in dry rooms in a non-tropical climate. In damp
rooms or outdoors, there is the risk of short circuits (risk of fire) or electric shock (danger of death).
Danger: Do not insert any objects through the ventilation slot. Risk of electric shock (danger of death).
Danger: Do not put any containers filled with liquid (e.g. vases) on the device. There is a risk of electric
shock (danger of death) or (risk of fire).
Danger: No open sources of fire such as burning candles are permitted to be placed on the device (risk of
fire).
Danger: Ensure that there is a clearance of at least 20cm around the device. The device ventilation is not
permitted to be impaired by covering the
Ventilation openings with objects such as newspapers, tablecloths, curtains, etc. (risk of fire).
Warning: Follow all instructions in the device-specific operating manual.
3. Maintenance
