IQSpeakerphone S500
Installation
Packing List
Product Overview
Installation steps
Where there is high noise, the speakerphone may pick up the noise, and when you
talking, it will prevent the speakerphone to enter the receiving mode.
The surface of the speakerphone will be scratched by vibration.
Do not place items within 60 cm of the speakerphone.
Please use the power adapter provided by the product to avoid accidents.
To ensure normal the use of a speakerphone, please do not install the speakerphone at
the following locations:
Keypad
If you need to talk over a USB cable, connect one end of the USB cable to the USB
port of the device and the other end to the USB port of the speakerphone.
If you need a LINE IN/LINE OUT to call, please connect one end of the 3.5mm analog
audio LINE to the LINE IN/LINE out port of the video conferencing terminal and the
other end connect to the IN/OUT port of the speakerphone.
When choosing to install two expansion microphone, use the expansion microphone
connector to connect the speakerphone EXT1, EXT2 port.
LED Status indicator
DIN6 Cable port
(connect to Hub)
expansion microphone
port 1
expansion microphone
port 2
USB port(power supply)
Volume Button
Press the Volume down/up button
Long press this button for 3 seconds
Press the Answer/End calls button
Turn on/off Mute Microphone button
Press “ ” for 5 seconds, then press “ ”and “ ”at
the same time to enter the PC mode, exit the mobile
phone mode, and the working status light flashes blue
three times
Short press this button to turn on/off the mute speaker,
long press this button for 5 seconds, the working status
indicator blue light flashes three times, indicating
entering/exiting AUX mode (default AUX mode is off)
Speaker Mute
Turn on/off
Answer/ End calls
Mute Microphone
PC Mode
Mobile Mode
Echo Cancellation
Mode
Line in/out port
Speakerphone
Optional Accessories
USB Cable
Quick Guide
Power adapter
Wireless adapter
Expansion Microphone
(up to 2pcs)
4P4C Cable
(2.5M)
Headphone cable
Quick Guide
Press “ ” for 5 seconds, then press “ ”and “ ”at
the same time to enter the mobile phone mode, exit
the PC mode, and the working status light flashes blue
three times
Press “ ” for 5 seconds, then press “ ”and “ ”at
the same time to enter/exit the echo cancellation
mode, and the working status light flashes blue three
times
