iQMS362i CE
Operator’s Manual
888-274-7744
www.iqpowertools.com
En
gli
sh
REPLACING CARBON BRUSHES
The carbon brushes must be removed and checked
regularly. Weekly if the machine is used daily. These
instructions apply to the saw motor and the vacuum
motor. The two carbon brushes (A) and (B) are located
on the front and back side of the motor. Loosen carbon
brush retainer cap with standard screwdriver.
Remove carbon brush retainer cap.
Remove carbon brush.
Inspect carbon brush and replaced it necessary.
Install carbon brush making sure to align tabs into slots.
Tighten carbon brush retainer cap to secure.
INSPECTING AND REPLACING THE CARBON BRUSHES
WARNING!
MAKE SURE CUTTING BLADE
COMES TO A COMPLETE STOP
BEFORE PERFORMING ANY MAINTENANCE OR TRANSPORTING.
11.3
