background image

 

1.07.2020                                               

www.ips-ups.eu

                                              LiftUPS-manual-EN-R1 

 

1 Safety and General Information

 

 

The  information  in  this  document  is  subject  to  change  without  notice,  as 

standards,  specifications,  and  designs  change  from  time  to  time,  please ask 

for confirmation of the information given in this publication.

 

  

 CAUTION

 

 

 

Consulting  the  dealer  is  required  before  using  for  below  equipment.  Its 

application,  configuration,  management  and  maintenance  must  be  specially 

considered and designed.

 

 

 

Medical equipment which is directly related to patients’ life

 

Equipment which may endanger personal safety

 

Non-qualified electricians are forbidden to open the case due to hazard of 

electrical shock. And only qualified electricians can make wiring or maintain 

the UPS due to naked electrical parts at the external wiring section.

 

 

The product is not intended to be used alone for users, it is designed for 

special application. Separated fire-retardant enclosure or casing for 

protection is required.

 

 

The product must be grounded firmly when it is connected to the utility 

power.

 

 

Output short-circuit is not allowed for the UPS in case of connecting to the 

utility power.

 

 

Avoid a short circuit on positive and negative polarities of battery, otherwise 

it can lead to electric shocks or a fire.

 

 

Cut off the electricity supply immediately when the UPS operates 

abnormally, and contact your dealer.

 

 

 

 

~ 1 ~

 

Summary of Contents for LiftUPS-1k0-3LED-BC60











Reviews: