© 2022 System Q Ltd
1
IPMITTER 5.8GHz 48V 900Mbps IP Bridge
IPmitter is a registered trademark of System Q Ltd
Document ref: qIPMIT430
IPMIT430 / IPMIT460 - Quick Start Guide
The IPMIT430s can be used to "bridge" an wireless IP connection for IP cameras or other IP devices
wireless between two points, devices connect via the RJ45 port on the IPmitter.
Powering
Option 1
- Power from 12V DC (via the 2.1mm DC Socket), the current consumption is 300mA.
The IPMIT430 is polarity sensitive so connections must be made correctly.
Option 2
- Power the camera using 48V PoE, in the RJ45
WAN/POE
Socket
The IPMIT430 will take approximately 3 minutes to boot up.
1 = Function Button
2 = LED Display
3 = Setting
4 = 12V DC. 2.1mm DC Socket
5 = Reset/Pair Button
6 = WAN - 10Mbs / 100Mbs / 1000Mbs 48 PoE network socket
7 = LAN - 10Mbs / 100Mbs network socket
Standard WiFi Bridge Setup
For more setup options see the full manual
