20/06/2022
xIPMIT204
1
Introduction
The budget IPmitters have a data transfer rate of 300Mbs, using the 2.4Ghz band,
this is aimed at cost conscious installations.
The IPmitter works in 2 modes with LED pairing, Repeater mode and AP mode, the
Host acts as the Access point (AP) and the client sets up as the repeater to provide
a WiFi Bridge between the two.
IPMIT204 Can be powered using 48 PoE (Not supplied) or can be powered using
12V DC (Not supplied).
User Information
The connections to the must be clean and dry, and not exposed to moisture or
excessive dust.
Do not touch the any of its connections with wet hands.
Ensure the power is switched off to the IPmitter if not in use for a long period of
time.
There are no user serviceable parts in the IPmitter and opening or attempting to
repair the product will void the warranty.
Only use a 12V DC Regulated PSU (at least 500mA) or a 48V PoE Supply (also
known as 802.3af).
Do not install or use the device if the power cable or network connection is
damaged.