20/06/2022
xIPMIT204
9
5.4 Example - Multiple Pairs
Pairing on channel 007 and 010
1
. Power one pair of IPmitters, and leave to boot up for at least 3 mins. During boot
up they will display a rotating segment
[
_i
]
2
. On one IPmitter (client), press the F (function) button and "H" will flash
[
H007
]
.
Press the S (setting) button to change to
[
C 007
].
3
. The whole display will flash to indicate the settings have been saved, it will reboot
(can take up to 3 mins) then the display will show
[
C007
]
.
4
. Now press the RST (reset) button for 1 second on both IPmitters
[
H007
]
[
C007
].
The display will change to a P with a rotating segment whilst pairing
[
P __
].
Pairing
can take up to 5 minutes.
The display will show P and a value once paired
[
P0
10
] [
P0
12
].
5.
Down-power the paired units and then boot up the next pair.
6.
On one IPmitter (client), press the F (function) button and "H" will flash
[
H007
]
.
Press the S (setting) button to change to
[
C007
].
7.
The whole display will flash to indicate the settings have been saved, it will reboot
(can take up to 3 mins) then the display will show
[
C007
]
.
8.
On the Host, press the F (function) button two times. Press the S (setting) button
until the display shows
[
H0 10
].
9
. Now press the RST (reset) button for 1 second on both IPmitters
[
H0 10
]
[
C007
].
The display will change to a P with a rotating segment whilst pairing
[
P __
].
Pairing
can take up to 5 minutes.
The display will show P and a value once paired
[
P0
10
] [
P0
12
]
.
10
. Power the first pair of IPmitters back up and check to ensure the two pairs work
correctly.