| Operation
58
YLS-K
7
Operation
WARNING
Danger from laser radiation
Laser radiation can damage the eyes and skin.
ð
Never disable the prescribed safety equipment.
ð
Observe all instructions and information from
the Safety section.
WARNING
Danger of burns
Immediately after the laser machining (soldering/
welding/cutting), the machined surfaces of the
workpieces are very hot.
ð
Wear safety gloves while working with these
workpieces.
Safety measures during integration into other ma-
chines
The laser was developed solely for integration into
other devices or machines. All fiber outlets of the
laser system are products of laser class 4. It is the
user’s responsibility to ensure that the fiber outlet or
the process optics are given a protective housing to
ensure laser class 1 according to EN 60825-1. The
laser cabinet and the feeding and process fibers cor-
respond to laser class 1.
7.1
Operating modes
The product can be operated in two operating modes.
TEST
Operating mode TEST is for manual operation of the laser. In TEST
mode, the laser can be controlled via the LaserNet software and mainte-
nance work can be performed.
ROBOT
The ROBOT mode is the automatic mode of the laser and the standard
operating mode for production operation. The laser is controlled via the
hardwiring interface or an external fieldbus interface, if present. The
LaserNet software is used for monitoring the laser operation.