IPG Interpack USC 2024-BB 3, Operations Manual & Parts List

Page: 37 / 56

Set-Up Procedures USC 2024-
BB 3” UNIFORM SEMI-AUTOMATIC CASE SEALER
4-12
4.12 T
APE
T
HREADING
1. Thread the Tape Tail over the Peel Off Roller (refer to Figure 4-14).
2. Thread the Tape over and around the first
“smooth” Guide Roller.
3.
Continue to thread the tape over and around the “knurled” Clutch Roller.
4.
Pass the tape up and over the second “smooth” Guide Roller.
5. Continue threading the tape over and behind the final Knurled Guide Roller.
6. Thread the tape through the cut-out provided in the Tape Guide Shoe and pull the tape through the front
Application Roller, make sure that the tape is retained in the Tape Guide Shoe.
7. Cut off the folded tape.
8. Replace the Tape Head to its initial position in the machine.
Figure 4-12 Tape Threading