IPG Interpack ET 2Plus H275, Operator'S Manual & Parts List

Page: 29 / 78

29
R00
P
REVENTIVE
M
AINTENANCE
UUU
Lubrication
The ET 2Plus tape heads ship from the factory permanently lubricated. No additional lubrication is
necessary, however, a small amount of lightweight oil applied to rotating and pivot points will extend the
life of the tape head and assure maximum performance.
There is, however a felt pad on the blade guard which can serve as an oiler pad to help clean the blade
should adhesive accumulate. At regular intervals, depending on usage, add a small amount of mineral oil
or silicon spray so that when a case is processed, the oil from the pad is transferred to the blade as the
knife guard is opened and closed.
UUU
Oiler Pad Lubrication
UUU
WARNING
UUU
:
USE CAUTION WHEN OILING THIS PAD AS THE CUTTER BLADE IS VERY SHARP
1. Retract the blade guard using the
extension tab as a handle
2. Remove any debris or accumulated
adhesive build up
3. Apply 5 – 10 drops of either mineral oil
or silicon lubricant to the pad.
4. Carefully release the blade guard
against the blade
Figure 10-2