IPG BETTER PACKAGES RSA 2024-WAT-EU, Manual

Page: 63 / 220

Preventive Maintenance RSA2024-WAT-EU
7-10
7.10 C
UTTER
B
LADE
R
EPLACEMENT
WARNING: The knife contained in the tape heads is extremely sharp. Use caution when
threading the tape or performing maintenance to avoid injury.
1. Remove tape shoe from tape head from
top tape head, (refer to Section 7.5 ) or
tape shoe from tape head from bottom
tape head, (refer to Section 7.6 ).
2. Remove the water pot from top tape
head, (refer to Section 7.5 ) or water pot
from tape head from bottom tape head,
(refer to Section 7.6 ).
3. Remove the upper guide plate, (refer to
Section 7.5 ).
4. Remove the three 4mm countersink hex
screws with a 2.5mm hex key.
5. Remove the cutter blade (refer to Figure
7-26).
6. Remove the two 4mm screws on the
striker plate with a 2.5mm hex key.
7. Remove the striker plate (refer to Figure
7-27).
8. Replace the cutter blade and striker plate.
9. Place the water pot assembly and upper
guide plate back into tape head.
Figure 7-27 Striker Plate
Cutting Blade
Striker Plate
Striker Plate
Figure 7-26 Striker Plate and Cutting Blade