IPG BETTER PACKAGES RSA 2024-WAT-EU, Manual

Page: 32 / 220

RSA2024-WAT-EU Set-Up Procedures
4-7
4.6 C
ONNECTING
U
TILITIES
4.6.1 Electrical Utilities
A 3657.6mm (12 ft) standard three-conductor power cord with plug is provided for 220V, 50HZ, 10A electric
service. The receptacle must be properly grounded. Before the machine is plugged into the receptacle, ensure
that all materials are removed from the machine. The electrical control is protected with an automatic circuit
breaker with resettable overload.
The electrical box is located on one side of the RSA2024-WAT-EU Case Sealer. It contains an HMI that can be
used to adjust machine operation settings as needed.
The control box contains a
Start
button, the
Emergency Stop
switch, a
Manual/Auto
switch, a
Tape Feed/Cut
button, a
Head Up
button, a
Head Down
button, a
Tape Threading/Stop
button, a
Tape Base In/Out
button, a
Clear button, and a Top/Both/Bottom selector switch (refer to Figure 4-12 ).
Figure 4-9 Electrical Utilities
Note:
Moving the control box to the opposite side of the machine requires disconnecting and
reconnecting electrical wires and components. Only trained and qualified service technicians
should access an open control box. Follow all possible safety procedures prior to and during this
process.