IPG BETTER PACKAGES RSA 2024-WAT-EU, Manual

Page: 28 / 220

RSA2024-WAT-EU Set-Up Procedures
4-3
4.3 M
ACHINE
H
EIGHT
A
DJUSTMENT
WARNING: Machine height adjustment requires raising the machine to adjust each leg.
Follow all possible safety procedures prior to and during this process.
The RSA2024-WAT-EU Case Sealer must be installed on near-level ground. Use the adjustable legs to ensure
that the machine is level and firmly on the ground (no rocking). Adjust the leg height with the four telescopic
extension legs to accommodate conveyor heights from 609.6 - 762mm (24 - 30 in.).
1. To adjust the height of the Case Sealer,
use a forklift to raise the machine to give
ample room to extend the legs.
2. Using a 19mm box end wrench, loosen
eight 12mm hex head adjustment bolts
(refer to Figure 4-3).
3. Adjust the legs to the desired conveyor
height and tighten bolts. Etched lines on
the legs ease leveling.
Leg
Extension
Leg
Adjustment
Bolts
Figure 4-3 Machine Height Adjustment