IPG BETTER PACKAGES RSA 2024-WAT-EU, Manual

Page: 20 / 220

RSA2024-WAT-EU Important Safeguards
2-7
2.5 O
PERATOR
S
KILL
L
EVEL
D
ESCRIPTIONS
Important: The area supervisor must ensure that the operator has been properly trained on all machine
functions before operating the machine.
2.5.1 Skill “A” Machine Operator
This operator is trained to use the machine with the machine controls. This operator can feed cases into the
machine, make adjustments for different case sizes, change tapes, and start/stop, and re-start production.
2.5.2 Skill “B” Mechanical Maintenance Technician
This technician is trained to use the machine as the machine operator, and is able to work with the safety
protection disconnected, check and adjust mechanical components, perform maintenance operations, and
repair the machine. He is not allowed to work on live electrical components.
2.5.3 Skill “C” Electrical Maintenance Technician
This technician is trained to use the machine as the machine operator, and is able to work with the safety
protection disconnected, check and adjust mechanical components, perform maintenance operations, and
repair the machine. He is allowed to work on live electrical panels, terminal blocks, and control equipment.
2.5.4 Skill “D” Manufacturer’s Technician
Skilled technician sent by the manufacturer, or its agent, to perform complex repairs or modifications, when
agreed to by the customer.
Operator’s Skill Level Required to Perform the Following Tasks on the Machine
Operation Machine Condition
Operator Skill
Level
Number of
Operators
Machine Installation & Set-Up Running with Safety Protections
Disabled
B & C 2
Tape Roll Replacement
Stopped by Pressing the
Emergency Stop (E-Stop) Button
A 1
Blade Replacement Electrical Power Disconnected B 1
Drive Belt Replacement Electrical Power Disconnected B 1
Ordinary Maintenance Electrical Power Disconnected B 1
Extraordinary Mechanical
Maintenance
Running with Safety Protections
Disabled
D 1
Extraordinary Electrical
Maintenance
Running with Safety Protections
Disabled
C 1